Made in USA

We do it all from our home base in Indianapolis.

Here for You

Top level support form the source. We can help with photo advice too!

Built with Love

Individually checked for fit and water pressure tested to 200' (60m).

World-Wide

We are supported by our network of dealers in over 95 countries.

SKU: 44702

TT2 Sony TTL Fiber Optic Transmitter for DL and DLM Underwater Housings

Sale price$ 375.00

Ikelite TTL exposure algorithms for underwater strobes has been famous for accuracy since the dawn of digital. Now you can enjoy the most reliable Sony TTL strobe exposure with a fiber optic connection between your Ikelite housing and strobes.

Key Features

The TT2 supports second curtain synchronization (i.e. rear curtain sync) and switching between TTL and manual strobe exposure using the camera's flash menu.

High frame rate burst shooting is supported when used with an Ikelite 160-, 165-, DS230-, or 232-series strobe. 

Replace your Ikelite flash bulkhead or 1/2-20 accessory port plug with this compact, independently sealed device, for reliable fiber optic triggering of a compatible Ikelite strobe.

Battery Life

The transmitter is powered by two CR2032 lithium single-use or rechargeable batteries (not included). The Transmitter has a built-in power save mode which prolongs battery life. Expect at least a week of diving out with average use. It is always recommended to travel with a spare set of batteries.

Strobe Compatibility

These strobes are natively compatible with the TT2 Sony TTL Transmitter:

 

  • Ikelite Ecko Fiber
  • Ikelite RC165
  • Ikelite RC232

Most non-Ikelite strobes may be triggered in manual mode only using this transmitter. Non-Ikelite strobes will not provide TTL operation.

Legacy DS Strobes

Legacy Ikelite DS-series strobes can be triggered in TTL or manual by adding an RC2 TTL Receiver. Each strobe needs its own RC2 TTL Receiver.

Additional maintenance is required when using older nickel plated plugs and bulkheads in combination with the newer aluminum style. It is important to disconnect the components to clean and lightly lubricate the threads after each day of diving. Failure to maintain the connections will result in the seizing up the dissimilar metals. If the components become fused together, they cannot be separated - it is necessary to replace both components. 

Housing and strobe compatibility information is listed below.

Depth Rating

200 feet (60 meters)

Have questions?

We're here for you for every step along the way. Email ikelite@ikelite.com for help on gear selection, assembly, camera settings, and photo advice. We can even help you decide where to dive!