Made in USA

We do it all from our home base in Indianapolis.

Here for You

Top level support form the source. We can help with photo advice too!

Built with Love

Individually checked for fit and water pressure tested to 200' (60m).

World-Wide

We are supported by our network of dealers in over 95 countries.

RC1 Olympus & Panasonic TTL Receiver for DS Strobes

SKU: 4414

RC2 TTL Receiver for DS Strobes

Name: RC2 TTL Receiver for DS Strobes
Brand: Ikelite
SKU: 4414
Price: 150.0 USD
Availability: InStock

$ 150.00

Convert your Ikelite DS strobe's electrical bulkhead to a fiber optic connection for use with compatible Ikelite TTL Fiber Optic Transmitters.

An individual RC2 TTL Receiver and compatible fiber optic cord is needed for each strobe. Use of two strobes requires two receivers. This product attaches to an Ikelite DS strobe. It is not intended to be attached to a housing and will provide no functionality if attached to a housing bulkhead. This receiver is not compatible with non-Ikelite strobes or non-digital Ikelite strobes.

Refer to housing and strobe compatibility information below.

Depth Rating

330 feet (100 meters)

Weight

3 oz

Have questions?

We're here for you for every step along the way. Email ikelite@ikelite.com for help on gear selection, assembly, camera settings, and photo advice. We can even help you decide where to dive!

Manual Strobe Exposure

The strobe's output may be adjusted using the manual power settings built into the strobe (varies by model). Make sure the camera’s flash mode is set to manual. Choose the minimum flash output necessary in the camera to trigger the DS strobe. This will conserve the camera’s battery power.

Camera and Housing Compatibility

Ikelite Housing Models with TT5 Canon TTL Transmitter # 44701 installed.

Strobe and Cord Compatibility

Fiber Optic Cord Compatibility:

(recommended) Ikelite Fiber Optic Coiled Cord # 4501
INON Optical D Cable "Non-wireless type" L-Connector
SEA&SEA Fiber Optic Cable (L-type) # 50107
SEA&SEA Fiber Optic Cable II # 50128
Olympus UW Fiber Optic Cable PTCB-E02
Nauticam Optical Fiber Cable # 26211 Nauticam to INON
Nauticam Optical Fiber Cable # 26212 Nauticam to Sea&Sea

Consult with your housing manufacturer for information on what type of fitting is provided at the housing end. The fiber optic ports on Ikelite housings are made to the same standard as SEA&SEA and Olympus brands.

Strobe Compatibility:

Ikelite DS50 above serial # 70000
Ikelite D51
Ikelite DS125 above serial # 5000
Ikelite DS160, DS161, DS162
Ikelite DS200 above serial # 7163
Ikelite DS230, DS232

This product is not compatible with non-digital Ikelite strobes, SEA&SEA, INON, or other non-Ikelite strobes.