RC1 Olympus & Panasonic TTL Receiver for DS Strobes
Enjoy true Olympus or Panasonic LUMIX TTL strobe exposure via fiber optic connection with your compatible Ikelite DS strobe. With the RC1 TTL Receiver and a compatible camera with RC flash mode, actual exposure data is calibrated and communicated directly by the camera. This is far more accurate and consistent than "slave TTL" modes built into some underwater strobes which watch the camera's built-in flash and react.
An individual RC1 TTL Receiver and compatible fiber optic cord is needed for each strobe. Use of two strobes requires two receivers. This product attaches to an Ikelite DS strobe. It is not intended to be attached to a housing and will provide no functionality if attached to a housing bulkhead. This receiver is not compatible with non-Ikelite strobes or non-digital Ikelite strobes.
330 feet (100 meters)
RC Mode TTL Strobe Exposure
Manual Strobe Exposure
Camera and Housing Compatibility
Strobe and Cord Compatibility
In the Box
Always Be Learning
From our Photo School...
The Myth of TTL Strobe Exposure Underwater
When to Use a Compact 8" Dome Port Underwater
When to Use a DC Series Dome Port Underwater
My Must Have Underwater Housing Accessory [VIDEO]
5 Situations Where You Need Strobes [VIDEO]
Straight vs 45 Degree Magnified Viewfinder for Underwater Shooting
The Right Lens for Every Situation Underwater
Checking for Leaks Using a Vacuum Pump [VIDEO]
Large Bore M24 Port Modifications for HDMI Monitor Bulkheads
When to Use a WD-3 or WD-4 Wide Angle Dome Underwater
The Secret to Underwater Photography with Olympus and Panasonic Cameras [VIDEO]