Update Kit Olympus Tough TG-6
Slight differences in camera control location may cause the Playback button of the Olympus TG-6 camera intermittent when used in older housings # 6233.06 shipped prior to the release of the TG-6 camera.
This kit is recommended for use with housings serial number UC63332 and below. The original push button tip is removed and this replacement tip is installed with the flat edge alongside the LCD framer.
Housings between serial number UC3332 and UC3397 shipped with the update pre-installed. Push button locations have been moved on housings above this serial number UC63397 so no special push button tips are necessary.
We're here for you for every step along the way. Email firstname.lastname@example.org for help on gear selection, assembly, camera settings, and photo advice. We can even help you decide where to dive!
In the Box
Always Be Learning
From our Photo School...
The Myth of TTL Strobe Exposure Underwater
When to Use a Compact 8" Dome Port Underwater
When to Use a DC Series Dome Port Underwater
My Must Have Underwater Housing Accessory [VIDEO]
5 Situations Where You Need Strobes [VIDEO]
Straight vs 45 Degree Magnified Viewfinder for Underwater Shooting
The Right Lens for Every Situation Underwater
Checking for Leaks Using a Vacuum Pump [VIDEO]
Large Bore M24 Port Modifications for HDMI Monitor Bulkheads
When to Use a WD-3 or WD-4 Wide Angle Dome Underwater
The Secret to Underwater Photography with Olympus and Panasonic Cameras [VIDEO]