Made in USA

We do it all from our home base in Indianapolis.

Here for You

Top level support form the source. We can help with photo advice too!

Built with Love

Individually checked for fit and water pressure tested to 200' (60m).

World-Wide

We are supported by our network of dealers in over 95 countries.

Underwater Housing for Canon PowerShot SX620 HS

SKU: 6242.62

Underwater Housing for Canon PowerShot SX620 HS

Name: Underwater Housing for Canon PowerShot SX620 HS
Brand: Ikelite
SKU: 6242.62
Availability: OutOfStock

$ 0.00

Sold out

This housing is out of stock and permanently out of production. We have no remaining new, blemished, or used inventory. We continue to provide service of this product even though it has been discontinued.

A compact, lightweight underwater housing for Canon PowerShot SX620 HS cameras that provides access to all camera functions up to 200ft (60m). Suitable for scuba, snorkel, surf, pool, and any application in or around the water.

If you're looking for a pocket-sized camera for both underwater and topside travel photography, then the PowerShot SX620 HS may be right for you. Its optically stabilized 25x zoom lens and large 20.2MP BSI-CMOS sensor provide high quality stills. Plus you can shoot video on the same dive with 1080/30p capture.

Clear Housing Back

See that your camera is dry inside

Specifications

Controls

Controls for all camera functions except Flash pop-up switch; flash may be opened prior to installation of camera in the housing

Strobe Connector

Fiber Optic Ports

Lens Port

3.9" Diameter

Depth Rating

200 feet (60 meters)

Weight

1.6 lb

Dimensions

6.2 x 5.3 x 4.5" (158 x 135 x 114 mm)

Rear O-Ring

0132.45

Ikelite underwater housing with dc series dome port copyright Dave Fason

When to Use a DC Series Dome Port Underwater

Have questions?

We're here for you for every step along the way. Email ikelite@ikelite.com for help on gear selection, assembly, camera settings, and photo advice. We can even help you decide where to dive!

Instruction manual

Construction

Our specially formulated ABS-PC blend housing is highly durable yet lightweight for travel. The light color keeps your camera cooler when shooting in warm, sunny environments.

Lens Support

The optional WD-4 Wide Angle Dome # 6430.4 provides a wider angle of view underwater without the edge distortion, heaviness, or difficult attachment typically associated with an external wide angle wet lens. The WD-4 is a 0.75x magnification factor and simply slides on and off of the housing's lens port.

A press-fit Macro Adapter # 9306.78 is available for the attachment of 67mm threaded accessory macro lenses. We recommend a macro lens which is designed for underwater use like those from Epoque, INON, Subsee, Nauticam, and other manufacturers. The adapter should not be used with 67mm threaded wide angle lenses. The wide angle lens would be too far away from the camera's lens to provide an improved image.

Wi-Fi Transfer

Use the camera's built-in Wi-Fi feature to download photos to another device without removing the camera from the housing. The Wi-Fi feature is only usable above water within close proximity to the connected device.

Compatibility

Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.

Differences in lens and control placement prevent other camera models from being used in or adapted to this housing. We are not aware of any other models which may be used in or adapted to this housing.

In the Box

Housing
O-ring # 0132.45 (installed)
Port cover # 0200.08 (installed)
Lanyard # 0321.10
Silicone lubricant 1cc tube

Always Be Learning