1-inch Standard Ball Clamp
This product is no longer available. Use the 1-inch Standard Ball Clamp V2 # 4081.24 instead.
The Standard Clamp attaches two (2) 1-inch diameter balls. Thicker plates provide the perfect combination of strength and range of motion. Plates are spring-loaded for easy assembly and breakdown of your arm system. A hard anodized aluminum wing nut allows for easy one-handed operation and will withstand years of use.
The 1-inch Ball Arm System Mark II features 1-inch ball components with a groove and o-ring to prevent slippage for improved holding power with less force. While underwater, clamps may be finger-tightened to keep lighting in place yet allow repositioning without loosening the clamp.
All parts are hard coat type III anodized for a long lasting, scratch resistant finish.
We're here for you for every step along the way. Email firstname.lastname@example.org for help on gear selection, assembly, camera settings, and photo advice. We can even help you decide where to dive!
In the Box
Always Be Learning
From our Photo School...
The Myth of TTL Strobe Exposure Underwater
When to Use a Compact 8" Dome Port Underwater
When to Use a DC Series Dome Port Underwater
My Must Have Underwater Housing Accessory [VIDEO]
5 Situations Where You Need Strobes [VIDEO]
Straight vs 45 Degree Magnified Viewfinder for Underwater Shooting
The Right Lens for Every Situation Underwater
Checking for Leaks Using a Vacuum Pump [VIDEO]
Large Bore M24 Port Modifications for HDMI Monitor Bulkheads
When to Use a WD-3 or WD-4 Wide Angle Dome Underwater
The Secret to Underwater Photography with Olympus and Panasonic Cameras [VIDEO]