Ikelite SubStrobe Part Numbers
(Reduce your browser font size if more than one line is required for each part)
|
Ikelite SubStrobe Part Numbers (Reduce your browser font size if more than one line is required for each part) |
|
SubStrobe 50, 50s, 51, AQ/S, M, MS, MV: |
Comments and Updates |
|
#0561.2 #0134.25 #9440.4 #9440.41 #9440.42 #9440.8 #9438.81 #9437.43 |
Removable Diffuser Battery door "O" ring (glued to door) Battery Door complete, orange Battery Door complete, black Battery Door complete, gray Mounting Block with wing nut AQ/S arm mount and shoe foot Diffuser and Shroud |
|
SubStrobe 100, Ai, Ai/n: |
Comments and Updates |
|
#0042.52 #0042.55 #0342 #9446.2 #0134.47 |
Aiming light bulb, standard Aiming light bulb, optional high intensity Wing Nut Battery door assembly Battery door "O" ring (glued to body) |
|
SubStrobe DS-125: |
Comments and Updates |
|
#0591.3 #0042.34 #0042.56 #0342 #0132.36 #4066.5 #4066.1 |
Removable Diffuser Aiming light bulb, standard Aiming light bulb, optional high intensity Wing Nut Battery-to-body "O" ring NiMH battery module with "O" ring (Requires #4066.1 charger) Smart Charger |
|
SubStrobe 200: |
Comments and Updates |
|
#0581.3 #0042.34 #0042.56 #9462.3 #9462.4 #9462.2 #0104 #4063.5 #4066.1 |
Removable Diffuser Aiming light bulb, standard Aiming light bulb, optional high intensity Aiming light bulb holder assembly complete Mount assembly with larger screws for body Battery door assembly complete Battery door "O" ring NiMH battery module (Requires #4066.1 charger) Smart Charger |
|
SubStrobe 150, 225, 300, 400: |
Comments and Updates |
|
#0042.56 #0042.34 #0342 #0137 Service: |
Aiming light bulb, new high intensity Aiming light bulb, less battery drain Wing Nut Body "O" ring (glued to body) These strobes are no longer able to be repaired or serviced |
|
Cords and connectors: |
|
#0136.13 #0136.13 #0118 #5020 #9104.5 #0301 #0301.1 #0301.12 |
Sync cord "O" ring, strobe end Sync cord "O" ring, TTL housing end Sync cord "O" ring, Nikonos connector Silicone lubricant for Ikelite "O" rings (four 1cc tubes) Waterproof cap for connector on strobe body Protective Cap ~ ICS connector - to - ICS connector Protective Cap ~ ICS connector - to - Nikonos Protective Cap ~ Single ICS connector |
|
We recommend using only "O" rings from Ikelite on Ikelite connectors for Nikonos, and only Ikelite #5020 silicone lube on all of our "O" rings to prevent possible softening and swelling in size. See the FAQ Topics section for frequently asked questions and testing procedures for cords and TTL functioning: |
|
 
 
|
|