Non-Ikelite Strobe Use
( Manual operation only with TTL conversion circuitry housings )
The #9571.3 Extended Mount shown above allows attaching most 1" diameter arm systems to the Ikelite Release Handles:
|
Non-Ikelite Strobe Use ( Manual operation only with TTL conversion circuitry housings ) |
The #9571.3 Extended Mount shown above allows attaching most 1" diameter arm systems to the Ikelite Release Handles: |
|
NIKONOS SB-103 and SB-105 strobe arms can be attached to the Release Handles with the #9575.4 and #0301.85** components shown. Required sync cord numbers for Nikonos strobes are shown.
Use with Ikelite dSLR housings that have TTL conversion circuitry requires special two-conductor Nikonos sync cords #4116.31 and #4116.32 identifiable by their blue band. |
|
Strobes from INON or SEA & SEA can be connected with the following sync cords:
#4118.1 One strobe to Ikelite Housing These cords connect sync circuit only, providing only manual strobe operation. TTL is not possible with these strobes and cords. We do not have sync cords for the new six conductor Sea & Sea YS55ettl strobe. |
|
 
 
 
|
|