Exposure Value Controller
Manual Controller for DS Series Strobes
|
|
Exposure Value Controller Manual Controller for DS Series Strobes |
|
|
Provides 10 manual power settings in half-stop increments for SubStrobe DS-50, DS-51, DS-80, DS-125 and DS-200 models. Any of our sync cords can be attached to the bulkhead on the EV Manual Controller; or the Controller also has a sensitive slave sensor allowing it to be triggered by another strobe. Simply point the Controller at a camera housing for dependable strobe triggering by the camera strobe without requiring fibre optic "sync cord" nonsense of other strobe systems. 
|
 See: SWITCH SETTINGS  #4100.6 Manual Controller .... $150 |
The Controller attaches to the strobe and mounts near the housing, providing maximum versatility and control of flash exposure. It can be used with normal or pre-flash camera and strobe systems. A second strobe with a Manual Controller can be set to any desired power and will operate dependably with the built-in slave sensor of the Controller aimed at the subject or the primary strobe; or the Controller can be connected to a dual sync cord.  |
|
 
 
|
|