ICS - Connector Specifications
|
ICS - Connector Specifications |
 |
These are the components that have proven so dependable in our strobes, sync cords, and SpD Lite System. Available in two, four or five conductor models. The "O" ring sealed system is easy to connect and disconnect, is waterproof and pressure proof to 300 feet, but it is NOT pluggable underwater. The current rating of the system is 12 volts @ 10 amp. The Bulkhead is supplied as components only, but is available with 6" long wire leads attached at additional cost. The Plug accepts wire from .125" to .250" diameter. The pins and receptacles accept 22 guage wire. The wire must be soldered to the pins and receptacles which are then pushed into the insulating grommet with a pair of needle nose pliars. The ICS Connector System is available for oem installation. Contact us for quantity pricing. Special order models can be made for different wall thickness applications. |
 |
 |
The #4006 Connector is nickel plated brass waterproof cable feed through-devices that accept wire from .125" to .260" diameter. The body installs in a 1/2" diameter hole with the nut provided, or can be screwed directly into a 1/2-20 threaded hole. External "O" ring and internal neoprene grommet provide dependable sealing. |
|
|
|
|